Quality
Assurance

 

We are rightly acknowledged as a quality conscious organization. Thus, we have been awarded with ISO 9001-2008. In this aspect, we have set up a fully equipped quality control unit in our facility. It is efficiently managed by our highly experienced team of quality controllers. They are experts in their respective domain. They are constantly engaged in administering various stringent quality tests on the entire range of the products manufactured by us. Further, we make sure to procure only the best quality raw materials to engineer these products.

Characteristics :

We conduct the following quality tests :
  • Quality of raw materials used
  • Performance
  • 100% burn-in test
  • Durability
  • Capacity to withstand high flow

In - house Test Facilities at FLU-TEF

Equipment Objective
Coating Thickness Measuring Instrument To measure plating thickness of Silver/Tin/Nickel on copper
AC High voltage unit (1) Dielectric withstanding voltage test (up to 25 KV)
(2 ) Spark test
(3) Jacket flaws
Cold Bend Test Chamber (1) Cold bend
(2) Thermal shock test (up to -65°C)
Dry heat chamber (1) Heat Resistance test
(2) Thermal Shock test
(3) Shrinkage test
(4) Blocking test
(5) Life cycle test (up to +400°C)  
(6) Ageing test
(7) Stress crack resistance test
(8)  Wrap back test
(9) Dimensional stability test
(10) Lamination sealing test
High Resistance Meter Measuring insulation resistance of wire & cable
Digital Micro ohm meter Measuring DC conductor resistance
Digital LCR meter (1) capacitance measurement
(2) Inductance measurement
Time Domain Reflactometer (1) velocity of propagation measurement
(2) impedance of cable measurement
(3) O.C & S.C in cable measurement
CRO (1) Time Delay test
(2) Inter pair & Inter pair screw delay
Network Analyser (1) Attenuation measurement
(2) structural return loss measurement (up to 26 GHz)
Flammability Test Setup Flammability Test
Tensile tester (1) Elongation & tensile test of conductor, PTFE tape & wire insulation
(2) To measure strip force of insulation on conductor
(3) Adhesion of conductor
Humidity Chamber (1) Surface resistance test
(2) Humidity test
Dry heat chamber (1) Pre conditioning of semi rigid cable
(2) Cut through test
Microscope (1) Concentricity test
(2) Eccentricity test
(3) wall thickness test
(4) Shrinkage of insulation